Burkert 8746, Operating Instructions Manual

Page: 37 / 60

37
Electrical installation
Type 8746 Profibus, 8746 Analogue
→
To choose the events that are assigned to the relay output, use
the Bürkert Communicator software. To connect the product to
the Bürkert Communicator software, refer to chpt. 10.4. Several
events can be associated to the relay output.
8.4 Wiring the product variant Profibus
To wire the product, you can use mating male or female con -
nectors from Bürkert. Refer to Tab. 26 .
Tab. 26: Accessories: male connector and female connector
item article number
Straight 5-pin M12 female connector 772416
Straight 5-pin M12 male connector
(B coding)
918198
Straight 5-pin M12 female connector
(B coding)
918447
Profibus* Y-piece 902098
Profibus T-piece 918531
Profibus termination resistor, male con -
nector (B coding)
902553
•
Observe the specifications for the cable and conductors,
that are given by the manufacturer of the mating female
connector and by the manufacturer of the mating male
connector.
•
Use cables with a cable shielding that is either a braid
shielding or a foil shielding.
→
To wire the mating female connector, refer to the pin assignment
of the M12 male connector in Fig. 21. Observe the instruc -
tions that are given by the manufacturer of the mating female
connector.
1
2 3
4
5
Coding lug
M12 thread is internally connected to FE
Pin Assignment
1 Shielding
2 24 V
3 GND
4
Not
connected
5
Not
connected
Fig. 21: MFM Profibus or MFC Profibus: Pin assignment, 5-pin M12
male connector (A coding)
→
Screw the mating female connector to the 5-pin male connector,
to the torque that is given by the manufacturer of the mating
female connector.
→
To wire the mating male connector, refer to the pin assignment
of the M12 female connector in Fig. 22. Observe the instructions
that are given by the manufacturer of the mating male connector.
English