Burkert 8746, Operating Instructions Manual

Page: 34 / 60

34
Electrical installation
Type 8746 Profibus, 8746 Analogue
1
2 3
4
5
Coding lug
M12 thread is internally connected to FE
Pin Assignment
1
GND for the ana -
logue output
2 24 V
3 GND
4 Not connected
5
Analogue output
for the measured
value
Fig. 18: MFM Analogue: Pin assignment, 5-pin M12 male connector (A
coding)
→ If your product is an MFC, wire the mating female connector
according to the pin assignment of the M12 male connector
in Fig. 19 .
1
2 3
4
5
Coding lug
M12 thread is internally connected to
FE
Pin Assignment
1
GND for the ana -
logue output and
the set-point input
2 24 V
3 GND
4 Set-point input
5
Analogue output for
the measured value
Fig. 19: MFC Analogue: Pin assignment, 5-pin M12 male connector (A
coding)
→ Observe the instructions that are given by the manufacturer of
the mating female connector.
→
Screw the mating female connector to the 5-pin male connector,
to the torque that is given by the manufacturer of the mating
female connector.
→ Wire the mating male connector according to the pin assignment
of the M12 female connector in Fig. 20. Observe the instructions
that are given by the manufacturer of the mating male connector.
2
1 4
3
5
Coding lug
M12 thread is internally connected to FE
Pin Assignment
1
GND for the digital
input
2 Digital input +
3
Relay - Reference
contact
4
Relay - Normally
closed contact
(Break contact)
5
Relay - Normally
open contact
(Make contact)
Fig. 20: MFM Analogue or MFC Analogue: Pin assignment, 5-pin M12
female connector (A coding)
→
Screw the mating male connector to the 5-pin female connector,
to the torque that is given by the manufacturer of the mating
female connector.
→
Do the functional earthing of the product. Refer to chpt 8.5.
English