33
Electrical installation
Type 8746 Profibus, 8746 Analogue
WARNING
Risk of injury from electromagnetic fields.
If the functional earth (FE) is not attached, then the requirements
of the EMC directive are not met.
▶
Connect the housing to the functional earth (FE). Use a green-
and-yellow cable that is as short as possible. And the cable
cross-section must be at least equal to the cross section of
the power supply cable.
NOTICE
requirements for the proper function of the product.
▶
Use only shielded cables.
▶
Use a power supply with sufficient power.
▶
For an MFC pay attention to the maximum permissible
residual ripple on the operating voltage. The residual ripple is
given in chpt. 6.8 Electrical data
8.2
Additional documentation
8.2.1
Product variant Analogue
•
Product-specific help in the Bürkert Communicator software
•
For an ATEX product variant: ATEX supplement for Type 8746
(download from
8.2.2
Product variant Profibus
•
Product-specific help in the Bürkert Communicator software
•
For an ATEX product variant: ATEX supplement for Type 8746
).
•
Product description file and object description for the related
product Type must be downloaded from
8.3
Wiring the product variant
Analogue
To wire the product, you can use mating male or female con
-
nectors from Bürkert. Refer to Tab. 22
.
Tab. 22: Accessories: male connector and female connector
item
article number
Straight 5-pin M12 female connector
772416
Straight 5-pin M12 male connector
772417
•
Observe the specifications for the cable and conductors,
that are given by the manufacturer of the mating male or
female connector.
•
Use cables with a cable shielding that is either a braid
shielding or a foil shielding.
→
If your product is an MFM, wire the mating female connector
according to the pin assignment of the M12 male connector
in Fig. 18
English
Summary of Contents for 8746
Page 59: ......
Page 60: ...www burkert com...
