33
Electrical installation
→
Connect the wires.
DO2+
DO1+
+24 V
–24 V
DI+
DI–
Figure 25:
Connection terminals
Pin
Assignment
DO2+
Digital output end position with actuator activated
DO1+
Digital output end position with actuator deactivated
+24 V
Operating v24 V
–24 V
Operating voltage GND
DI+
Digital input valve c
DI–
Digital input valve control –
Table 4:
Connection terminals
NOTE
Damage or malfunction due to ingress of dirt or moisture.
To observe the degree of protection IP65 or IP67:
▶
Tighten the union nut on the cable gland according to the cable size or dummy plugs used. (ca. 1.5 Nm).
▶
Screw in body casing to the stop.
→
Tighten union nut on the cable gland (torque approx. 1.5 Nm).
→
Check that the seal is correctly positioned in the body casing.
→
Close the device (see accessories for assembly tool).
english
Type 8691 REV.3
Summary of Contents for 8691 REV.3
Page 1: ...Operating Instructions Type 8691 REV 3 Control Head ...
Page 63: ......
Page 64: ...www burkert com ...
