Burkert 8691 REV.3 Operating Instructions Manual Download Page 62

Page: 62 / 64

Transportation, storage, disposal

TRANSPORTATION, STORAGE, DISPOSAL

NOTE

Damage in transit due to inadequately protected devices.

▶

Protect the device against moisture and dirt in shock-resistant packaging during transportation.

▶

Observe permitted storage temperature.

NOTE

Incorrect storage may damage the device.

▶

Store the device in a dry and dust-free location.

▶

Storage temperature: -20 to +65 °C

NOTE

Damage to the environment caused by device components contaminated with media.

▶

Dispose of the device and packaging in an environmentally friendly manner.

▶

Observe applicable disposal and environmental regulations.

Observe national regulations on the disposal of waste.

english

Type 8691 REV.3

Summary of Contents for 8691 REV.3

































































Search results

Summary of Contents for 8691 REV.3

Reviews:

Related manuals for 8691 REV.3

Brands by name

Popular brands

Burkert 8691 REV.3, Operating Instructions Manual

Search results

Summary of Contents for 8691 REV.3

Reviews:

Related manuals for 8691 REV.3

Brands by name

Popular brands