Bullhorn SDT16 Family, Installation And Configuration Manual, Page: 83 / 110

SDT16 Family Installation and Configuration Guide
Chapter 3. Configuration 73
Figure 3-16. Power/Battery Calendar
b.
Select the day the battery was installed by clicking a date in the calendar.
c.
Click
Save
.
N
OTE
:
If you decide to exit the UCT software and have not yet selected a folder on
your computer to store the Bullhorn Event Log, choose a folder when the
Browse for
Folder
window displays. For instructions about how to save the Event Log in a folder
on your computer, refer to the Event Log on page 66.
Configure the Controller Clock (GSM and ORB)
Complete the following steps for the SDT16-GSM and SDT16-ORB units:
1.
Click
Change
in the
Controller Clock
group box on the main configuration window to
display the
Controller Clock
configuration window. (Figure 3-17). You can also display the
Controller Clock
window either by clicking
Tools
>
Settings
>
Controller Clock
or pressing
F5
.
Figure 3-17. Controller Clock for GSM and ORB
2.
If your computer is setup with the correct date and time in Windows Control Panel, click
the
Set to PC Time
check box and then click
Save
.