Bull NovaScale R630 E1, Setup Manual, Page: 59 / 146

4-9
When the AC power is on (The power cords are plugged into the wall outlet)
(1) Confirm the POWER LED of the CPU/IO module.
z
If the POWER LED is illuminated, shut down the OS and unplug the AC
power cord after the POWER LED turns off.
z If the POWER LED is turned off, unplug the AC power cord.
(2) Execute the operation to be taken when AC power supply is turned off.
When the AC power is off (The power cord is not plugged into the outlet)
Connect the power cords to Fault Tolerant Server series in the following order:
(1) Connect the power cord to the AC inlet A connector.
(2) Connect the power cord to the AC inlet B connector.
(3) Make sure that the CPU/IO module status LED is turned off.
Preparation is now completed.
PCI Slot
Status
LED
PCI Slot Status
LED
DUMP (NMI)
Switch
AC Inlet
Connector B
Rear side of device
CPU/IO module 1
Status LED
CPU/IO module 0
Status LED
AC Inlet
Connector A