Bull NovaScale R630 E1, Setup Manual, Page: 35 / 146

3-7
●
Installing this device
Follow the steps below to set the 4U chassis to the rack.
IMPORTANT:
4U chassis weighs about 10 Kg. To mount, remove or replace it, be sure to hold it with two
or more people.
The following are the required accessories. Check if you have them all.
Tool Name Qty
- Bracket 2
- Panhead screw 4
- Panhead screw with washer 4
- Plate screw (short) 8
- Plate screw (long) 4
- Washer for plate screw 12
TIPS:
Core nuts (8 pieces) are not included. Use the core nuts that are attached to the rack.
Front side of 4U chassis
Back side of 4U chassis