Bull NovaScale R630 E1, Setup Manual, Page: 132 / 146

6-8
Updating the System
IMPORTANT:
Fault Tolerant Server series is a precision instrument. You should ask maintenance personnel to update the
system.
You will need to update the system after you repair the system using Recovery Console.
IMPORTANT:
„
Make sure to follow the steps below when you have restored the system by using Recovery Console.
„
Check the configuration for OS Boot Monitoring function.
If [OS Boot Monitoring] selected in [Monitoring Configuration] of [Server] is not set to “Disabled”, disable
it. See “Step 3: Disable OS Boot Monitoring Function” (page 4-9) for details.
„
When updating the system, considerations on settings of Power and Screen Saver are required.
If the following settings are enabled when updating the system, the process may stop or the system update
may not be applied properly. Disable the settings by clearing the checkboxes before updating the system.
Reconfigure the following settings as necessary afterwards.
- Settings of Screen Saver
- Power Schemes (Turn off monitor, Turn off hard disks)
- Hibernation (enable Hibernation)
1. Log on to the system with OS installed as user with Administrative account.
IMPORTANT:
Check that the dual system is configured properly (Confirm that the STATUS LED 2 on the CPU/IO
module illuminates green. See page 4-7 for location of the STATUS LED).
2. Remove duplications of all the LANs for both onboard and option boards.
When dual LAN is disabled, a setup of LAN will be deleted. Note down the setup information.
(a) Start Device Manager.
(b) Select the team adapter that you want to cancel duplication, and select [Properties] from the menu
displayed by right-click, to display the Properties window.