Bull NovaScale R630 E1, Setup Manual, Page: 122 / 146

5-12
CONFIRMING THE ft Server Control Software VERSION
The following describes how to check the version of ft Server Control Software, which consists of various types of
software for fault tolerance. Perform the procedure when you need to check the ft Server Control Software version of
the current system before adding units or attachment to Fault Tolerant Server series.
Confirm the version following the steps below:
1.
Log in the system as an authorized Administrator.
2. Open Control Panel from the Start menu.
3.
Open “Add or Remove Programs.”
You can confirm the version that corresponds to the name of [ft Server Control Software].