Bull NovaScale R630 E1, Setup Manual, Page: 53 / 146

4-3
SETUP FLOW
Step 1 Start the OS reinstallation setup procedure
Step 2 Prepare the OS reinstallation setup
Step 3 Disable OS Boot Monitoring Function
Set [EXPRESSBUILDER] DVD
Create [OEM-Disk]
Specify the size of the partition for OS installation
Prepare for Windows Server 2003 R2 32-bit Enterprise
Editions installation and ft Server Control Software
installation
Set OS (Windows) CD-ROM
Install driver in [OEM-Disk]
Start the OS installation
Apply [System Update]
Install ft Server Control Software and
NEC ESMPRO/ServerAgent
Set Windows Server 2003 R2 32-bit Enterprise Edition
CD-ROM
Automatic installation of following software:
Windows Server 2003 R2 32-bit Enterprise Edition
ft Server Control Software, ESMPRO
Server/Agent
Set the EXPRESSBUILDER CD-ROM Windows
Server 2003 x64 Editions (Manual Setup)
Set the EXPRESSBUILDER CD-ROM Windows
2003 (Express Setup)
Step 4B Manual Setup
: Entered or selected by the user
: Proceeds automatically
Setup
Step 5 Install Windows Server 2003
Service Pack
Step 7 Set Dual Disk Configuration
Step 6 Set Dual LAN Configuration
Step 8 Update Software
Step 9 Connect and Configure Options
Step 10 Create Volume
Step 12 Enable OS Boot Monitoring
Step 13 Make Settings for Failure
Step 14 Back up System Information
This flow chart illustrates the flow of the setup
procedures for the Fault Tolerant Server.
Step 4A Express Setup
Step 11 Set Network for NEC ESMPRO