Bull NovaScale R630 E1, Setup Manual, Page: 102 / 146

4-52
4.
Enter the location, where debug information is to be written, in the text box.
When writing debug information under the file name “MEMORY.DMP” in the D drive:
D:\MEMORY.DMP
IMPORTANT:
For Windows Server 2003 x64 Editions
„
[Automatically restart] must be checked for the system error settings. If you
uncheck [Automatically restart], debug info (memory dump) may not be saved.
„
[Complete memory dump] should be specified for writing debug information.
However, if the mounted memory size is over 2GB, specify [Kernel memory
dump]; you cannot specify [Complete memory dump], as [Complete memory
dump is not displayed on the drop down menu.
„
Specify a disk drive that has a free space of the memory size on the Fault Tolerant
Server 1MB or more.
„
If the memory is expanded to larger than 2GB, change Write Debugging
Information to [Kernel memory dump] before expanding the memory. Size of
the debugging information (memory dump) to be collected changes due to memory
the memory increase. Verify how much free space on the hard disk that debugging
information is to be written.
For Windows Server 2003
„
[Complete memory dump] should be specified for writing debug information.
However, if the mounted memory size is over 2GB, specify [Kernel Memory
Dump]; you cannot specify [Complete memory dump], as [Complete memory
dump] is not displayed on the drop down menu.
„
Specify a drive that has a free space of the memory size on the Fault Tolerant
Server 12MB or more (If the memory size is over 2GB,