Bull Cedoc Bullx R423-E3, Installation And User Manual

Page: 77 / 98

ASPM Support
This feature allows the user to set the Active State Power Management (ASPM) level for a PCI-E
device. Select Force L0s to force all PCI-E links to operate at L0s state. Select Auto to allow the system
BIOS to automatically set the ASPM level for the system. Select Disabled to disable ASPM support.
The options are Disabled, Auto, and Force L0s .
CPU1 Slot 1 PCI-E 3.0 x8 OPROM, CPU1 Slot 2 PCI-E 3.0 x8 OPROM, CPU1 Slot 3 PCI-E 3.0 x8
OPROM/, CPU2 Slot 4 PCI-E 3.0 x16 OPROM, CPU2 Slot 5 PCI-E 3.0 x8 OPROM, CPU2 Slot 6 PCI-E
3.0 x8 OPROM, CPU2 Slot 7
Select Enabled to enable Option ROM support to boot the computer using a device installed on the
slots specified above. The options are Enabled and Disabled .
Onboard LAN Option ROM Select
This feature selects whether to load the iSCSI or PXE onboard LAN option ROM. The options are
iSCSI and PXE .
Load Onboard LAN1 Option ROM, Load Onboard LAN2 Option ROM
Select Enabled to enable the onboard LAN1 Option ROM~LAN2 Option ROM. This is to boot the
computer using a network device. The default setting for LAN1 Option ROM is Enabled. The default
setting for LAN2 Option ROM is Disabled
LSI SAS 2208 OPROM
Select Enabled to use the LSI SAS Option ROM to boot the computer using a SAS device. The options
are Enabled and Disabled .
VGA Priority
Use this feature to specify which graphics controller to be used as the primary boot device. The
options are Onboard and Offboard (VGA) .
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible Firmware
Interface) for network stack support. The options are Enabled and Disabled.

Super IO Configuration
Super IO Chip: This item displays the name of the super IO chip used in the system.

Serial Port 1 Configuration
Serial Port
Select Enabled to enable serial port 1. The options are Enabled and Disabled .
Device Settings
This item displays the settings of Serial Port 1 .
Chapter 7. BIOS 67