Bull Cedoc Bullx R423-E3, Installation And User Manual

Page: 27 / 98

 For grounding purposes, make sure your computer chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and the
serverboard.
4.4 Operating Precautions
WARNING
Care must be taken to assure that the chassis cover is in place when the R423-E3 is
operating to assure proper cooling. Out of warranty damage to the system can occur if this
practice is not strictly followed.
Figure 4-1. Installing the Onboard CR2032 Battery
WARNING
Please handle used batteries carefully. Do not damage the battery in any way; a damaged
battery may release hazardous materials into the environment. Do not discard a used
battery in the garbage or a public landfill. Please comply with the regulations set up by
your local hazardous waste management agency to dispose of your used battery properly.
4.5 Electronic Certification
WARNING
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Chapter 4. System Safety 17