Bull Cedoc Bullx R423-E3, Installation And User Manual, Page: 32 / 98

5.4 Installing the Processor and Heatsink
CAUTION
When handling the processor package, avoid placing direct pressure on the label area.
Always connect the power cord last, and always remove it before adding, removing or
changing any hardware components. Make sure that you install the processor into the CPU
socket before you install the CPU heatsink.
CAUTION
If you buy a CPU separately, make sure that you use an Intel-certified multidirectional
heatsink only.
Make sure to install the system board into the chassis before you install the CPU heatsink.
When receiving a server board without a processor pre-installed, make sure that the plastic
CPU socket cap is in place and none of the socket pins are bent; otherwise, contact your
retailer immediately.
5.4.1 Installing the LGA2011 Processor
1. There are two load levers on the LGA2011 socket. To open the socket cover, first
press and release the load lever labelled 'Open 1st'.
22 bullx R423-E3 - Installation and User's Guide