Bull Cedoc Bullx R423-E3 Installation And User Manual Download Page 72

Page: 72 / 98

IOU2-PCIe Port

This feature allows the user to set the PCI-Exp bus speed between IOU2 and PCIe port. The

default setting is x8x8

Slot 2 Link Speed

Select GEN1 to enable PCI-Exp Generation 1 support for Slot 2 Port. Select GEN2 to

enable PCI-Exp Generation 2 support for Slot 2 Port. Select GEN3 to enable PCI-Exp

Generation 3 support for Slot 2 Port. The options are GEN1, GEN2, and GEN3

Slot 3 Link Speed

Select GEN1 to enable PCI-Exp Generation 1 support for Slot 3 Port. Select GEN2 to

enable PCI-Exp Generation 2 support for Slot 2 Port. Select GEN3 to enable PCI-Exp

Generation 3 support for Slot 2 Port. The options are GEN1, GEN2, and GEN3

IOU3-PCIe Port

This feature allows the user to set the PCI-Exp bus speed between IOU3 and PCIe port. The

default setting is x8x8

Slot 1 Link Speed

Select GEN1 to enable PCI-Exp Generation 1 support for Port 3A. Select GEN2 to enable

PCI-Exp Generation 2 support for Port 3A. Select GEN3 to enable PCI-Exp Generation 3

support for Port 3A. The options are GEN1, GEN2, and GEN3

LAN i350/x540 Link Speed

Select GEN1 to enable PCI-Exp Generation 1 support for the above port. Select GEN2 to

enable PCI-Exp Generation 2 support for the above port. Select GEN3 to enable PCI-Exp

Generation 3 support for the above Port. The options are GEN1, GEN2, and GEN3

IIO 2 PCIe Port Bifurcation Control

This submenu allows the user to configure the following IO PCIe Port Bifurcation Control

settings for IIO 2 PCIe port. These settings determine how to distribute the available PCI-

Express lanes to the PCI-Exp. Root Ports.



QPI Configuration

Current QPI Link Speed

This item displays the speed of the QPI Link.

Isoc

Select Enabled to enable Isochronous support to meet QoS (Quality of Service) requirements.

This feature is especially important for virtualization technology. The options are Disabled

and Enabled.

QPI (Quick Path Interconnect) Link Speed Mode

Use this feature to select data transfer speed for QPI Link connections. The options are Fast

and Slow.

QPI Link Frequency Select

Use this feature to select the desired QPI frequency. The options are Auto, 6.4 GT/s, 7.2

GT/s, and 8.0 GT/s.

bullx R423-E3 - Installation and User's Guide

Summary of Contents for Bullx R423-E3



































































































Search results

Summary of Contents for Bullx R423-E3

Reviews:

Related manuals for Bullx R423-E3

Brands by name

Popular brands

Bull Cedoc Bullx R423-E3, Installation And User Manual

Search results

Summary of Contents for Bullx R423-E3

Reviews:

Related manuals for Bullx R423-E3

Brands by name

Popular brands