Bull Cedoc Bullx R423-E3, Installation And User Manual, Page: 67 / 98

Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to
Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at boot and allow the
drives that are attached to these host adaptors to function as bootable disks. If this item is set to
Disabled, the ROM BIOS of the host adaptors will not capture Interrupt 19, and the drives
attached to these adaptors will not function as bootable devices. The options are Enabled and
Disabled .
Power Configuration
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to reboot when it is inactive for more than
5 minutes. The options are Enabled and Disabled.
Power Button Function
If this feature is set to Instant_Off, the system will power off immediately as soon as the user
presses the power button. If this feature is set to 4_Second_Override, the system will power off
when the user presses the power button for 4 seconds or longer. The options are Instant_Off and
4_Second_Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay Off for the system
power to remain off after a power loss. Select Power On for the system power to be turned on
after a power loss. Select Last State to allow the system to resume its last state before a power
loss. The options are Power On, Stay Off and Last State .
Chapter 7. BIOS 57