Bull Cedoc Bullx R423-E3, Installation And User Manual

Page: 87 / 98

Note After making changes on a setting, be sure to reboot the system for the
changes to take effect.


BMC Network Configuration
LAN Channel 1 : This feature allows the user to configure the settings for LAN Channel 1.
Update IPMI LAN Configuration
This feature allows the BIOS to implement any IP/MAC address changes at the next system
boot. If the option is set to Yes, any changes made to the settings below will take effect
when the system is rebooted. The options are No and Yes.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server in the network that is attached to and request the next
available IP address for this computer. The options are DHCP and Static.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal and in
dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each three-
digit number separated by dots should not exceed 255.
Station MAC Address
This item displays the Station MAC address of this computer. Mac addresses are 6 two-
digit hexadecimal numbers.
Gateway IP Address
This item displays the Gateway IP address for this computer. This should be in decimal and
in dotted quad form (i.e., 192.168.10.253).
Chapter 7. BIOS 77