Buick Lucerne 2007 Owner'S Manual Download Page 205

Page: 205 / 496

Tire Pressure Light

This light comes on
briefly when you turn
the ignition to RUN.

It will also come on when one or more of your
tires are significantly underinflated.

If your vehicle has a Driver Information Center
(DIC), a CHECK TIRE PRESSURE message will
accompany the light. See

DIC Warnings and

Messages on page 221

for more information.

Stop and check your tires as soon as it is safe to do
so. If underinflated, inflate to the proper pressure.
See

Tires on page 385

for more information.

This light will flash for about 60 seconds and then
stay on if a problem is detected with the Tire
Pressure Monitor system.

See

Tire Pressure Monitor System on page 393

for more information.

205

Summary of Contents for Lucerne 2007

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands

Buick Lucerne 2007, Owner'S Manual

Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands