Buick Lucerne 2007 Owner'S Manual Download Page 382

Page: 382 / 496

Taillamps and Back-Up Lamps

A. Taillamp

B. Back-up Lamp

To replace an auxiliary taillamp or back-up lamp
bulb, do the following:

1. Open the trunk. See

Trunk on page 106

for

more information.

2. Remove the three fasteners from the

trunk trim.

3. Pull back the trunk trim to access the bulbs.

4. Turn the bulb socket counterclockwise to

remove it.

5. Pull the bulb straight out.

6. Replace the bulb and reinstall it in the

assembly by turning it clockwise.

382

Summary of Contents for Lucerne 2007

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands

Buick Lucerne 2007, Owner'S Manual

Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands