Buick Lucerne 2007 Owner'S Manual Download Page 417

Page: 417 / 496

A. Center Retainer

B. Compact Spare Tire Cover

C. Retainer

D. Washer

E. Jack Container

F. Spare Tire

G. Wheel Wrench

H. Jack

I. Foam Insert

J. Bolt

1. Open the trunk. See

Trunk on page 106

for

more information.

2. Make sure the foam insert (I) is in place in the

trunk compartment.

3. Reinstall the compact spare tire (F) making

sure to line up the wheel center hole with the
bolt (J). Then place it on the compartment
floor.

4. Insert the jack container (E) into the spare

tire (F).

5. Insert the wheel wrench (G) and jack (H) into

the center of the compact spare tire making
sure to line up the wheel nut hole with
the bolt (I) on the compartment floor.

6. Secure the compact spare tire and the jack

container (E) with the washer (D) and the
retainer (C).

7. Reinstall the compact spare tire cover (B).

8. Secure with the center retainer (A).

The compact spare tire is for temporary use only.
Replace the compact spare tire with a full-size
tire as soon as you can. See

Compact Spare Tire

on page 418

for more information.

417

Summary of Contents for Lucerne 2007

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Lucerne 2007

Reviews:

Buick Lucerne 2007, Owner'S Manual, Page: 417 / 496

Search results

Summary of Contents for Lucerne 2007

Reviews: