Buick Lucerne 2007 Owner'S Manual Download Page 15

Page: 15 / 496

If the seats have manual reclining seatbacks, the
lever used to operate them is located on the
outboard side of the seats.

To recline the seatback, do the following:

1. Lift the recline lever.

2. Move the seatback to the desired position,

then release the lever to lock the seatback
in place.

3. Push and pull on the seatback to make sure it

is locked.

To return the seatback to an upright position, do
the following:

1. Lift the lever fully without applying pressure to

the seatback and the seatback will return to
the upright position.

2. Push and pull on the seatback to make sure it

is locked.

Passenger’s Seat shown

Summary of Contents for Lucerne 2007

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands

Buick Lucerne 2007, Owner'S Manual

Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands