Buick Lucerne 2007 Owner'S Manual Download Page 333

Page: 333 / 496

Hood Release

To open the hood, do the following:

1. Pull the hood

release handle
inside the vehicle. It
is located next to the
parking brake pedal
near the floor.

2. Then go to the front of the vehicle and pull

the secondary hood release to the right. The
hood latch is located under the hood, near
the center, at the front edge of the grille.

3. Hold the latch to the right as you lift up

on the hood.

Before closing the hood, be sure all the filler
caps are on properly. Then just pull the
hood down and close it firmly.

333

Summary of Contents for Lucerne 2007

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands

Buick Lucerne 2007, Owner'S Manual

Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands