Buick Lucerne 2007 Owner'S Manual Download Page 345

Page: 345 / 496

Then, without shutting off the engine, follow
these steps:

For the 3.8L V6 engine
the transaxle fluid
dipstick top is a round
loop with this symbol.
See

Engine

Compartment Overview
on page 334

for more

information on location.

1. Pull out the dipstick and wipe it with a clean

rag or paper towel.

2. Push it back in all the way, wait three seconds

and then pull it back out again.

3. Check both sides of the dipstick, and read the

lower level. The fluid level must be in the
cross-hatched area.

4. If the fluid level is in the acceptable range,

push the dipstick back in all the way.

3.8L V6 Engine

345

Summary of Contents for Lucerne 2007

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands

Buick Lucerne 2007, Owner'S Manual

Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands