Buick Lucerne 2007 Owner'S Manual Download Page 136

Page: 136 / 496

OnStar

service is provided to you subject to the

OnStar

Terms and Conditions. You may cancel

your OnStar

service at any time by contacting

OnStar

as provided below. A complete OnStar

Owners Guide and the OnStar

Terms and

Conditions are included in the vehicle’s OnStar

Subscriber glove box literature. For more
information, visit onstar.com or onstar.ca, contact
OnStar

at 1-888-4-ONSTAR (1-888-466-7827) or

TTY 1-877-248-2080, or press the OnStar

button

to speak with an OnStar

advisor 24 hours a day,

7 days a week.

Not all OnStar

features are available on all

vehicles. To check if your vehicle is equipped to
provide the services described below, or for a
full description of OnStar

services and system

limitations, see the OnStar

Owner’s Guide in your

glove box or visit onstar.com.

OnStar

Services

For new vehicles with OnStar

, the Safe & Sound

Plan, or the Directions & Connections

Plan is

included for one year from the date of purchase.
You can extend this plan beyond the first year, or
upgrade to the Directions & Connections

Plan.

For more information, press the OnStar

button to

speak with an advisor. Some OnStar

services

(such as Remote Door Unlock or Stolen Vehicle
Location Assistance) may not be available until you
register with OnStar

136

Summary of Contents for Lucerne 2007

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands

Buick Lucerne 2007, Owner'S Manual

Search results

Summary of Contents for Lucerne 2007

Reviews:

Related manuals for Lucerne 2007

Brands by name

Popular brands