Buick 2007 Rendezvous Owner'S Manual Download Page 482

Page: 482 / 528

At Least Once a Year

Starter Switch Check

{

CAUTION:

When you are doing this inspection, the
vehicle could move suddenly. If the
vehicle moves, you or others could be
injured.

1. Before you start, be sure you have enough

room around the vehicle.

2. Firmly apply both the parking brake and the

regular brake. See

Parking Brake on

page 135

Do not use the accelerator pedal, and be
ready to turn off the engine immediately if it
starts.

3. Try to start the engine in each gear. The

vehicle should start only in PARK (P) or
NEUTRAL (N). If the vehicle starts in any
other position, contact your GM Goodwrench

dealer for service.

482

Summary of Contents for 2007 Rendezvous

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Rendezvous

Reviews:

Related manuals for 2007 Rendezvous

Brands by name

Popular brands

Buick 2007 Rendezvous, Owner'S Manual

Search results

Summary of Contents for 2007 Rendezvous

Reviews:

Related manuals for 2007 Rendezvous

Brands by name

Popular brands