Buick 2007 Rendezvous Owner'S Manual Download Page 163

Page: 163 / 528

Your luggage carrier has release levers within the
end of each crossrail support.

To adjust the crossrail(s), the sunroof stop (A), if
the vehicle has one, must be removed.

To remove the sunroof stop, do the following:

1. Find the tool (B) located in a bag in the glove

box labeled TOOL KIT-ACSRY.

2. Use the tool to remove the screw located in

the side rail assembly in front of the front
crossrail.

3. Repeat for the other side.

4. Put the tool and the screws back in the plastic

bag in the glove box.

163

Summary of Contents for 2007 Rendezvous

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Rendezvous

Reviews:

Related manuals for 2007 Rendezvous

Brands by name

Popular brands

Buick 2007 Rendezvous, Owner'S Manual

Search results

Summary of Contents for 2007 Rendezvous

Reviews:

Related manuals for 2007 Rendezvous

Brands by name

Popular brands