Buick 2007 Rendezvous, Owner'S Manual

Page: 12 / 528

To store the memory settings, do the following:
1. Adjust the driver’s seat and the outside
rearview mirrors to the position you would like
for driving.
2. Press and hold memory button 1 for more
than three seconds.
A double beep will sound when the memory seat
and mirror position have been stored.
To store the seat and outside rearview mirror
positions for a second driver, follow the previous
steps, but press button 2 instead.
To recall your stored positions, your vehicle must
be in PARK (P). Press and release the memory
button (1 or 2) corresponding to the desired driving
position. The seat and the outside rearview
mirrors will move to the position previously stored
for the identified driver. You will hear one beep.
To store an exit position for each driver, do the
following:
1. Move the seat to the desired exit position.
2. Hold the button with the exit symbol, located
below the memory buttons, for more than
three seconds.
The exit position stored will be for the most
recently selected driving position (1 or 2). A double
beep will sound when the exit position is stored.
To use the exit feature, your vehicle must be
in PARK (P). Press and release the button with
the exit symbol and the seat will move to the exit
position stored for the most recently selected
driver. You will hear one beep.
To stop recall movement of the seat at any time,
press one of the three memory buttons or one
of the power seat controls located on the outboard
side of the driver’s seat.
If your vehicle is equipped with a Driver
Information Center (DIC), you can use it to
program certain functions of the memory seats.
See
DIC Vehicle Personalization on page 240 .
12