Buick 2007 Rendezvous Owner'S Manual Download Page 48

Page: 48 / 528

2. Push the latch plate into the buckle until it

clicks.

If the belt stops before it reaches the buckle,
tilt the latch plate and keep pulling until
you can buckle it.

Pull up on the latch plate to make sure it is
secure.

If the belt is not long enough, see

Safety Belt

Extender on page 56

. Make sure the

release button on the buckle is positioned so
you would be able to unbuckle the safety
belt quickly if you ever had to.

3. To make the lap part tight, pull down on the

buckle end of the belt as you pull up on the
shoulder part.

Summary of Contents for 2007 Rendezvous

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Rendezvous

Reviews:

Related manuals for 2007 Rendezvous

Brands by name

Popular brands

Buick 2007 Rendezvous, Owner'S Manual

Search results

Summary of Contents for 2007 Rendezvous

Reviews:

Related manuals for 2007 Rendezvous

Brands by name

Popular brands