manualshive.com logo in svg

Buick 2007 Rendezvous, Owner'S Manual

The Buick 2007 Rendezvous Owner's Manual is a comprehensive guide that provides crucial information about your vehicle. This manual is available for free download on our website, ensuring easy access to all owners. Discover the wealth of knowledge contained within this manual to enhance your Rendezvous driving experience.

Share
Download
background image

Video Screen

The video screen is located in the overhead
console.

To use the video screen, do the following:

1. Push forward on the release button and the

screen will fold down.

2. Push the screen away from you and adjust its

position as desired.

When the video screen is not in use, push it up
into its stowed and latched position.

The DVD player and display will continue to
operate when the video screen is in either the up
or down positions.

The video screen contains the transmitters for the
wireless headphones and the receiver for the
remote control. If the screen is in the closed
position, the signals will not be available for the
operation of the headphones or the remote control.

Notice:

Avoid directly touching the video

screen, as damage may occur. See “Cleaning
the Video Screen” later in this section for
more information.

DVD Player

The DVD player is located in the overhead
console.

The DVD player can be controlled by the buttons
on the DVD player, and/or by the buttons on
the remote control. See “Remote Control” later in
this section for more information.

The RSE system DVD player is only compatible
with DVDs of the appropriate region code for the
country that the vehicle was sold in. The DVD
region code is printed on the jacket of most DVDs.

Standard audio CDs, CD-R, CD-RW, Video CD
and Photo CD/CD-R media are fully supported by
this DVD player. DVD-R and DVD-RW media
is supported if formatted as DVD-Video. DVD+R
and DVD+RW media may or may not be supported
by the DVD player. The DVD player does not
support DVD-RAM, DVD-ROM, and DVD Audio
media. An error message will appear on the
display if this type of media is inserted into the
DVD player.

If an error message appears on the video screen,
see “DVD Messages” later in this section.

282

Summary of Contents for 2007 Rendezvous

















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Rendezvous

Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
DEFA 412737 Fitting Instructions Manual preview
412737
Brand: DEFA Pages: 7
Prorack K869 Fitting Instructions Manual preview
K869
Brand: Prorack Pages: 15
Dacia 2014 Sandero Driver'S Handbook Manual preview
2014 Sandero
Brand: Dacia Pages: 238
Eaton Green Motion DC 66 User Manual preview
Green Motion DC 66
Brand: Eaton Pages: 18
Saleen 10-8002-C11670C Manual preview
10-8002-C11670C
Brand: Saleen Pages: 17
Cadillac 2007 SRX Owner'S Manual preview
2007 SRX
Brand: Cadillac Pages: 522
SAN HIMA SH-TENT-SY20 User Manual preview
SH-TENT-SY20
Brand: SAN HIMA Pages: 7
Paccar Peterbilt SmartAir Operator'S Manual preview
Peterbilt SmartAir
Brand: Paccar Pages: 58
Mercedes-Benz 300 SL Operator'S Manual preview
300 SL
Brand: Mercedes-Benz Pages: 153
GMC 2010 Tahoe Owner'S Manual preview
2010 Tahoe
Brand: GMC Pages: 120
Prime Tech H-066 User Manual preview
H-066
Brand: Prime Tech Pages: 6
Velleman CARS4500 User Manual preview
CARS4500
Brand: Velleman Pages: 12
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
S&B Filters 75-5053 Installation Instructions preview
75-5053
Brand: S&B Filters Pages: 4
Mazda 2016 CX3 Service Information preview
2016 CX3
Brand: Mazda Pages: 3
CITROËN Jumpy Miltispace Owner'S Handbook Manual preview
Jumpy Miltispace
Brand: CITROËN Pages: 164
Directed MIT4 Firmware Specific Manual preview
MIT4
Brand: Directed Pages: 30

Brands by name

Popular brands

Load more brands