Buick 2007 Rendezvous Owner'S Manual Download Page 167

Page: 167 / 528

Reinstalling the Extended Rear
Convenience Center

1. Make sure that all items have been removed

from the rear of the vehicle.

2. Remove the carpeted mat from the vehicle.

3. Lift the forward bin into the back of the

vehicle. Place the mounting brackets onto the
forward mounting bolts on the floor of the
vehicle.

4. Put the nuts back onto the mounting bolts and

tighten.

5. Lift the rear bin into the back of the vehicle.

Place the rear bin over the center T-shaped
wall on the forward bin. Push down to secure.
Align the rear bin over the rear mounting bolts.

6. Put the nuts back onto the mounting bolts and

tighten.

7. Push and pull on the rear storage system to

make sure that it is locked into place properly.

167

Summary of Contents for 2007 Rendezvous

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Rendezvous

Reviews:

Related manuals for 2007 Rendezvous

Brands by name

Popular brands

Buick 2007 Rendezvous, Owner'S Manual

Search results

Summary of Contents for 2007 Rendezvous

Reviews:

Related manuals for 2007 Rendezvous

Brands by name

Popular brands