manualshive.com logo in svg

Buick 2007 Rendezvous, Owner'S Manual

The Buick 2007 Rendezvous Owner's Manual is a comprehensive guide that provides crucial information about your vehicle. This manual is available for free download on our website, ensuring easy access to all owners. Discover the wealth of knowledge contained within this manual to enhance your Rendezvous driving experience.

Share
Download
background image

Replacing the Split Bench Seat

{

CAUTION:

If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.

{

CAUTION:

A seat that is not locked into place
properly can move around in a collision or
sudden stop. People in the vehicle could
be injured. Be sure to lock the seat into
place properly when installing it.

{

CAUTION:

A safety belt that is improperly routed, not
properly attached, or twisted will not
provide the protection needed in a crash.
The person wearing the belt could be
seriously injured. After installing the seat,
always check to be sure that the safety
belts are properly routed and attached,
and are not twisted.

Make sure that the seatback is in the folded
forward position and that the safety belts are on
the correct section of the seat.

Do not put the sections of the bench seat in so
that they face rearward because they will not latch
that way.

19

Summary of Contents for 2007 Rendezvous

















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Rendezvous

Lancia Y Owner'S Handbook Manual preview
Y
Brand: Lancia Pages: 191
Safe Fleet PRIME DESIGN VRI3-E-PM11 Manual preview
PRIME DESIGN VRI3-E-PM11
Brand: Safe Fleet Pages: 12
Jacobsen Cushman Turf Truckster Parts & Maintenance Manual preview
Cushman Turf Truckster
Brand: Jacobsen Pages: 210
DAVIS 8126GD User Manual preview
8126GD
Brand: DAVIS Pages: 32
BMW E39/2 Installation Instructions Manual preview
E39/2
Brand: BMW Pages: 21
Saab 2008 9-5 Owner'S Manual preview
2008 9-5
Brand: Saab Pages: 288
Sunsky S-GPS-0142 User Manual preview
S-GPS-0142
Brand: Sunsky Pages: 9
Safe Fleet inView 360 Fusion Calibration Manual preview
inView 360 Fusion
Brand: Safe Fleet Pages: 27
Seat ROADSIDE ASSISTANCE Handbook preview
ROADSIDE ASSISTANCE
Brand: Seat Pages: 44
Vauxhall Astra 2021 Owner'S Manual preview
Astra 2021
Brand: Vauxhall Pages: 259
Honda Sedan CIVIC 2022 Manual preview
Sedan CIVIC 2022
Brand: Honda Pages: 701
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
Yakima RimROC Instructions Manual preview
RimROC
Brand: Yakima Pages: 12
Axxess AXDSPX-VW1 Installation Instructions Manual preview
AXDSPX-VW1
Brand: Axxess Pages: 16
Brink 5978 Fitting Instructions Manual preview
5978
Brand: Brink Pages: 21
EUFAB 12014 Manual preview
12014
Brand: EUFAB Pages: 20
Brigade VBV-770-310 Quick Installation Manual preview
VBV-770-310
Brand: Brigade Pages: 12
DRAGONFIRE 11-0800 Installation Instructions preview
11-0800
Brand: DRAGONFIRE Pages: 4

Brands by name

Popular brands

Load more brands