Buick 2007 Rendezvous Owner'S Manual Download Page 87 | Manualshive

Page: 87 / 528

background image

6. To tighten the belt, push down on the child

restraint, pull the shoulder portion of the belt
to tighten the lap portion of the belt, and
feed the shoulder belt back into the retractor.
If you are using a forward-facing child
restraint, you may find it helpful to use your
knee to push down on the child restraint
as you tighten the belt. You should not be able
to pull more of the belt from the retractor
once the lock has been set.

7. Push and pull the child restraint in different

directions to be sure it is secure.

8. If your vehicle has the passenger sensing

system and the airbag is off, the off indicator
will be lit and stay lit in the inside rearview
mirror when the key is turned to ON or
START.

If a child restraint has been installed and the on
indicator is lit, turn the vehicle off. Remove
the child restraint from the vehicle and reinstall the
child restraint.

If, after reinstalling the child restraint and restarting
the vehicle, the on indicator is still lit, check to
make sure that the vehicle’s seatback is not
pressing the child restraint into the seat cushion. If
this happens, slightly recline the vehicle’s
seatback and adjust the seat cushion if possible.
Also make sure the child restraint is not trapped
under the vehicle head restraint. If this happens,
adjust the head restraint.

If the on indicator is still lit, secure the child in the
child restraint in a rear seat position in the
vehicle and check with your dealer.

To remove the child restraint, just unbuckle the
vehicle’s safety belt and let it go back all the way.
The safety belt will move freely again and be
ready to work for an adult or larger child
passenger.

87

«
...
85
86
87
88
89
...
»

Summary of Contents for 2007 Rendezvous

















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Rendezvous

Brand: Jeda Pages: 8

Brand: Jeep Pages: 496

2011 grand cherokee

Brand: Jeep Pages: 22

2013 Grand Cherokee

Brand: Jeep Pages: 704

Brand: Jeep Pages: 558

Brand: TATA Motors Pages: 156

Brand: Sirius Satellite Radio Pages: 8

autoSteady AS101

Brand: Enduro Pages: 48

Brand: Whispbar Pages: 14

Brand: AA Products Pages: 6

Brand: Volvo Pages: 266

Brand: Guidosimplex Pages: 8

Brand: Fab Fours Pages: 21

Brand: rough country Pages: 4

2010 MX-5 Miata

Brand: Mazda Pages: 8

RAV-4 2015 Series

Brand: Toyota Pages: 50

Brand: Huf Pages: 6

Brand: Honda Pages: 253

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands