38
Troubleshooting
INSTRUCTIONS THAT APPEAR IN THIS USER GUIDE DO NOT
COVER EVERY POSSIBLE CONDITION OR SITUATION. USE GOOD
JUDGMENT WHEN OPERATING THIS OR ANY OTHER MACHINERY.
If the Vento blender develops faults or defects or if irregularities are suspected, unplug it immediately.
If you cannot eliminate the fault by following the instructions in this manual, contact Customer Care at
BUGATTI. Repairs carried out incorrectly can expose the user to serious harm. No liability is accepted for
damage or injury caused by repairs carried out incorrectly and in such cases warranty rights are avoided.
The motor does not start
to turn
1) The plug of the
blender’s cable (7) is not
well inserted in the wall
socket.
2) The plug of the
blender’s cable (7) is not
well inserted in the socket
on the back of the power
base (6).
1) Check if the blender cable’s (7) plug of the power
base (6) is well connected to the wall socket.
2) Check if the blender cable’s (7) plug of the power
base (6) is well connected to the wall socket.
Check your house circuit breaker switch or fuse to
make sure it is set to the ON position.
Check that there is electricity in your system.
Trouble
Possible cause
Solution
1) Check if the blender cable’s (7) plug of the power
base (6) is well connected to the wall socket.
2) Check if the blender cable’s (7) plug of the power
base (6) is well connected to the wall socket.
Check your house circuit breaker switch or fuse to
make sure it is set to the ON position.
Check that there is electricity in your system.
1) The plug of the
blender’s cable (7) is not
well inserted in the wall
socket.
2) The plug of the
blender’s cable (7) is not
well inserted in the socket
on the back of the power
base (6).
The display (10) doesn’t
switch on.
