34
Advice and recommendations on use
D. Using the 6 preset functions
1) Adhere strictly to all safety, installation and instructions specified before.
2) Once the plug of the cable (7) has been plugged in all the proximity touch panel (10)
switches on and, immediately, only the red start button (16) blinks and the display shows OFF. This is an
important signal that indicates that the blender is connected to the power supply and is therefore carrying
live current, while the blender functions are in stand-by.
3) Put the jar (3), which has been assembled according to instructions, on the motor base (6).
4) Remove the lid (2) and the measuring filler cup (1) from the jar (3).
5) Cut the food into cubes or slices to obtain the ideal result.
6) Place the food that you are going to blend in the jar (3) (without exceeding the maximum permitted le-
vel of 1.0 litres – 32 onzs) and put the lid (2) complete with the measuring filler cup (1) back on the jar (3).
7) When the jar (3) and the lid (2) are properly in their places on the motor base (6), the functions of the
blender can be selected by touching the desired icon
8) The preset functions can be used to avoid any manual change of speed, improving the blending.
9) Choose the function needed among the 6 preset by touching the icon (from 1 to 6) on the
proximity touch panel (10).
10) The selected icon starts to blink.
11) To start the function touch the Start button (16).
12) The embodied preset functions are 6 and all have different programming according to the most used
beverage.
The colour of base may vary
