background image

27

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS CAREFULLY. THE APPLIANCE 

MUST BE USED ONLY BY ADULTS WHO HAVE BEEN 

TRAINED IN ITS USE. KEEP THESE INSTRUCTIONS.

1.TO PREVENT SERIOUS INJURIES, ELECTRIC SHOCKS 

AND FIRE DO NOT IMMERSE CABLES, PLUGS, OR THE 

BLENDER ITSELF IN WATER OR OTHER LIQUIDS, EITHER 

PARTIALLY OR TOTALLY

2.

 The blender has been designed for 

HOUSEHOLD AND PROFESSIONAL USE

. Use the blender

only for its intended use. Do not make any technical modification.

3. 

Close supervision is necessary when any appliance is used near children.

The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction. The blender
must be used only by adults who know how to use it in accordance with these instructions.

4.

 Never touch live electrical parts. They may cause electric shocks and serious personal injury. Connect

the blender to a wall socket having the appropriate voltage. The voltage must correspond to the voltage
indicated on the rating plate underneath the appliance. Do not use the blender with bare or wet feet.

5.

 A short power cable with plug is supplied. Long detachable power cords or extension cables should not be used. Use one only 

if a

 

QUALIFIED ELECTRICIAN

 can confirm that it complies with wiring regulations. 

DO NOT USE

 plug/socket adapters. If a long detachable power cable or extension cable is used:

a)The electrical rating of the detachable power cable or extension cable should be at least as great as the
electrical rating of the blender indicated underneath the blender itself.
b) A long cable or extension cable must never protrude from furniture or over counter tops or table tops where
it may be pulled on by children or tripped over.
c)Do not place blender or cables on or near a hot gas range or electric hotplate, or in or near the oven.
d) Do not use outdoors.
e) Do not let the cables hang over the edge of the table or counter, or touch hot surfaces.
f) Do not operate the blender after it has developed faults, or has been damaged in any manner. Return
appliance to the nearest authorized service facility for examination or repair.
g) If the power cable or plugs are damaged, they must be replaced by the manufacturer or with authorized
service centre or by a qualified person in order to prevent all risks.
Using accessories that have not been recommended by the manufacturer may cause fires, electric shocks and personal injury.

Summary of Contents for VENTO Professional


























Reviews: