29
IMPORTANT SAFEGUARDS
22.
The lid (2) and measuring filler cup (1) must always be in position when the blender is running.
23.
Never use your hands to insert food. Use the measuring filler cup or appropriate utensils to pour or insert food into the jar.
24.
Do not attempt to remove the safety devices: you could cause serious personal injury or severely damage the blender.
25.
Always start blending at a low speed and increase speed only if necessary.
26.
The jar (3) is not for storing food. Always keep it empty, dry and clean when not in use.
27.
For best results cut the food into cubes or slices.
28.
When blending hot liquids wear oven gloves.
29.
If you wish to make cold drinks from foods having high density, add an ice cube each time to reach the desired consistency.
Use the pulse button (14) to obtain a better result.
30.
In the event of faults, defects or suspected defects after a fall, remove the plug immediately from the power socket.
Never use the blender if it is faulty. Repairs must be carried out by BUGATTI Service Centre. Contact your dealer and/or BUGATTI
Customer Care. Use a carbon dioxide (CO2) extinguisher to fight fires. Do not use water or powder extinguishers.
31.
Vento Blender is well equipped with an over-temperature automatic protection. This system will give much longer life to the
motor of your blender. If the unit is overheated automatically stops all its functions and the display will show E3. The ventilation
fan will keep running to cool down the unit. After cooling down the blender will be able to operate again normally.
32.
Ref approval and FCC regulation only:
a. 15.21: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the
equipment.
b. 15.105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/ TV technician for help.
