32
Advice and recommendations on use
A. Using functions with 60 speeds and pulse button 11
1) Adhere strictly to all safety, installation and instructions specified before.
2) Once the plug of the cable (7) has been plugged in all the proximity touch panel (10) switches on and,
immediately, only the red start button (16) blinks and the display shows OFF. This is an important signal that
indicates that the blender is connected to the power supply and is therefore carrying live current, while the
blender functions are in stand-by.
3) Put the jar (3), which has been assembled according to instructions, on the motor base (6).
4) Remove the lid (2) and the measuring filler cup (1) from the jar (3).
5) Cut the food into cubes or slices to obtain the ideal result.
6) Place the food that you are going to blend in the jar (3) (without exceeding the maximum permitted level
of 1.0 litres – 32 onzs) and put the lid (2) complete with the measuring filler cup (1) back on the jar (3).
7) When the jar (3) and the lid (2) are properly in their places on the motor base (6), the red start button (16)
is steady and all icons on the display (10) are on. The functions of the blender can be selected by touching
the number or icon desired on the display (10) .
8) Hold the jar (3) handle firmly with one hand and turn the speed selector (11) to the desired speed.
To increase the speed: turn the Knob speed control (11) clockwise.
To decrease the speed: turn the Knob speed control (11) anticlockwise.
The speeds are 60; refer to the conversion table for the RPM (Rounds Per Minute).
9) The blender can be stopped any time simply by touching the red stop button (12) on the display (10) or by
turning the knob speed control (11) anticlockwise until the speed 0;
WARNING: ALWAYS KEEP A HAND ON TOP OF THE LID WHILST THE MOTOR IS RUNNING.
10)
THE PULSE FUNCTION can be used at all speeds at which the blender is running.
11) Press the knob speed control (11) to achieve maximum speed. Only while pushing it, the pulse function is
activated. This makes the blades rotate at the maximum speed until the pulse button (11) is released.
12) Once the pulse button (11) is released, the blender will return to the speed settled with the speed
selector (11).
13) To remove the jar (3), take the jar (3) by the handle and lift it up vertically to remove it from
the motor base (6). To pour the blended food, remove the lid (2).
14) Do not loosen the nut ring (4) of the blade unit (5) from the jar (3) while there is any liquid in the blender
as this will cause leaks of liquid from the bottom of the jar (3).
15) When blending hot food or liquids wear oven gloves.
16) The Vento Blender is provided with the patented Bugatti Safety system to ensure safe operations: the
system allows the motor to run only if the lid (2) is perfectly put on the jar (3) and the jar (3) itself is
correctly put on the motor base (6).
17) Use a spatula only when the blender is switched off and the plug (7) is unplugged from the socket.
