Buell XB 2008 Series, Service Manual

Page: 171 / 688

10
5
6
2
7
10
3
4
9
6
8
8
7
1
sm00621
6. 1. Screws (2), upper headlight mounting Horn
2. 7. Horn connectors [122] Headlight assembly
8. 3. Screws (2), headlight support bracket Horn bracket
4. 9. Horn fastener Headlight support bracket
10. 5. Left and right front modules Headlight connector [38]
Figure 2-143. Headlight and Support Bracket: Ulysses
DISASSEMBLY: LIGHTNING/ULYSSES
1. See Figure 2-144 . Remove rubber boots (1) from rear of
headlight housing.
2. Disconnect wiring harness (5) from headlight bulbs (3)
and remove along with position bulb socket (6).
3. Remove bulb holders (2).
4. Remove headlight bulbs (3) from back of headlight housing
(4).
ASSEMBLY: LIGHTNING/ULYSSES
1. See Figure 2-144 . Align and install headlight bulbs (3) into
back of headlight housing (4).
NOTE
The tab on the base of the headlight bulb should rest between
the two tabs located at the top of the hole on the back of the
headlight assembly.
2. Install bulb holders (2).
3. Connect wiring harness (5) to headlight bulbs (3) and
install rubber boots (1) and install position bulb socket (6)
between the headlights. For alignment of rubber boots,
see
7.15 HEADLIGHT .
2008 XB Service: Chassis 2-95