Buell XB 2008 Series, Service Manual

Page: 567 / 688

B.1 WIRING DIAGRAMS
CONNECTOR LOCATIONS
Function/Location
Refer to Table B-1 . On the motorcycle, a connector can be
identified by its function and location.
Place and Color
The place (number of wire cavities of a connector housing)
and color of the connector can also aid identification.
Connector Number
On wiring diagrams and in service/repair instructions, con-
nectors are identified by a number in brackets.
Repair Instructions
The repair instructions in this Service Manual are by connector
type. Refer to
Table B-1 .
Table B-1. Connector Locations: XB Models
LOCATION TYPE COMPONENT NUMBER
ULYSSES LIGHTNING FIREBOLT
N/A Under Seat Spade terminals Main fuse [5]
N/A Left side under
tail section
8-place Multilock Tail lamp harness [7]
Under seat In fairing 12-place Deutsch ECM (black) [10]
Under seat In fairing 12-place Deutsch ECM (gray) [11]
Under sprocket cover 3-place Deutsch Cam position sensor [14]
Under rear wire
cover
Under seat Under tail sec-
tion
2 1-place bullet Right rear turn signal [18]
Under rear wire
cover
Under seat Under tail sec-
tion
2 1-place bullet Left rear turn signal [19]
Behind windscreen Beneath right
side of fairing 4-place Multilock Right hand controls [22]
Behind windscreen Beneath left side
of fairing
8-place Multilock Left hand controls [24]
Behind windscreen In fairing 5-place Amp Flasher [30]
Behind windscreen Beneath right
side of fairing 2 1-place bullet Right front turn signal [31 R]
Behind windscreen Beneath left side
of fairing
2 1-place bullet Left front turn signals [31 L]
Behind windscreen Beneath right
side of fairing 4-place Augat Ignition switch [33]
Behind windscreen Beneath fairing 4-place Amp Headlamp connector [38]
In front modules behind wind-
screen
In fairing 20-place Multilock Instrument module [39]
Under rear wire
cover
Under seat N/A 2 1-place bullet License plate lamp [45]
2008 XB Service: Appendix B Wiring B-1