Buell XB 2008 Series, Service Manual

Page: 381 / 688

2
1
9
3
23
7
4
5
11
18
17
13
14
12
16
10
19
20
21
24
22
6
8
23
8
15
sm00266
17. 9. 1. Return spring Drive housing mounting screw Through-bolt (2)
2. 18. 10. End cover screw and o-ring
(2) Ball Drive housing
11. 19. Solenoid housing Gasket
3. 20. 12. End cover Washer (2) Drive assembly/overrunning
clutch
4. 21. Brush holder Mounting bolt (2)
13. 22. Idler gear 5. Field wire Brush spring (4)
6. 23. 14. Armature O-ring (2) Idler gear roller (5)
15. 7. 24. Idler gear bearing cage Field frame Field wire nut with washer
(metric)
16. 8. O-ring Armature bearing (2)
Figure 5-13. Starter Assembly
INSTALLATION
1. Install starter and starter gasket from the gearcase cover
side.
2. See Figure 5-15 . Install both starter mounting bolts and
washers. Tighten to 13-20 ft-lbs (18-27 Nm).
3. See Figure 5-14 . Connect wiring to starter.
a. Connect solenoid wire (3).
b. Attach positive battery cable (2) to stud with fastener
and washer (1) (metric).
c. Tighten nut to 60-85 in-lbs (7-10 Nm).
d. Reinstall existing protective boot.
2008 XB Service: Electric Starter 5-7