SAFETY GUIDELINES
19.
DO NOT TURN THE MOTOR SWITCH ON AND OFF RAPIDLY.
This could
cause the wheel to loosen and create a hazard. Should this ever occur,
stand clear and allow the wheel to come to a complete stop. Disconnect your
grinder from the power supply and retighten the wheel nut securely.
20.
RISK OF INJURY DUE TO ACCIDENTAL STARTING.
Do not use in an area
where children may be present.
21.
NEVER START THE GRINDER
when the wheel is in contact with the
workpiece.
22.
SECURE WORK.
Always hold the workpiece firmly against the work rest.
23.
DO NOT USE THE BENCH GRINDER
if the flange nut or clamp nut is
missing or if the spindle shaft is bent.
24.
FREQUENTLY
clean grinding dust from beneath the grinder.
25.
DO NOT OPERATE THIS TOOL WHILE UNDER THE INFLUENCE OF
DRUGS, ALCOHOL OR ANY MEDICATION.
26.
ALWAYS STAY ALERT.
Do not allow familiarity (gained from frequent use
of your grinder) to cause a careless mistake.
ALWAYS REMEMBER
that a
careless fraction of a second is sufficient to inflict severe injury.
27.
STAY ALERT AND EXERCISE CONTROL
. Watch what you are doing and
use common sense. Do not operate the tool when you are tired. Do not rush.
28.
SAVE THESE INSTRUCTIONS.
Refer to them frequently and use them to
instruct other users. If you loan someone this tool, loan them these
instructions also.
29.
ALWAYS EASE THE WORKPIECE AGAINST THE ABRASIVE WHEEL
when starting to grind. A harsh impact can break the wheel. Use light pressure
when starting to grind. Too much pressure on a cold wheel can cause the
wheel to crack.
30.
USE ONLY FLANGES
furnished with this bench grinder.
31.
IF ANY PART OF THIS GRINDER IS MISSING
or should break, bend, fail
in any way, or should any electrical component fail to perform properly,shut
off the power switch, remove the machine plug from the power surce and
have damaged, missing, or failed parts replaced before resuming operation.
32.
SAFETY SHIELD AND SPARK DEFLECTOR.
The safety shields and spark
deflectors are adjustable for operator convenience. Operating the grinder
without these features attached could result in serious injury. Do not grind
with the safety shield raised. Always wear safety glasses for personal
protection.
33.
WORK REST.
The work rests are independently adjustable to compensate
for wheel wear. Before grinding, make certain the work rests are adjusted
properly. Generally, the object being ground is done slightly above the center
8
TDS-200C4HL
Summary of Contents for TDS-200C4HL
Page 24: ...23 TDS 200C4HL EXPLODED VIEW...
