SAFETY GUIDELINES
BENCH GRINDER SAFETY
1. Wear eye protection that complies with ANSI Z87.1 specifications.
2. Use grinding wheels suitable for the speeds of the grinder.
3. Stand beside the bench grinder during start-up, not facing directly in front.
4. Do not remove the wheel guard.
5. Do not use the grinding wheel to cut anything.
6. Do not use anything to stress the grinding wheel.
7. Use a grinding wheel dressing tool to shape or remove glaze from grinding
wheels.
8. Adjust distance between wheel and tool rest to maintain 1/8 inch (3.2 mm)
or less separation as the diameter of the wheel decreases with use.
9. Connect to a supply circuit protected by a circuit breaker or time-delay fuse.
10. Secure the bench grinder to its supporting surface to prevent the grinder from
tipping over, sliding, or walking on its supporting surface.
A. Replace a cracked wheel immediately.
B. Always use the guards and eye shields.
C. Do not overtighten the wheel nut.
D. Use only flanges furnished with this grinder.
11. Always inspect grinding wheels prior to use for cracks, missing pieces, etc.
Replace wheel immediately before use.
12. USE ONLY GRINDING WHEELS that comply with ANSI B7.1 and rated
greater than 3450 RPM.
13. GUARD AGAINST ELECTRICAL SHOCK by preventing body contact with
grounded surfaces. For example: pipes, radiators, ranges, refrigerator enclosures.
14.
DO NOT
use wheels with incorrect size holes.
NEVER
use wheel washers or
wheel screws that are defective or incorrect, and
NEVER
touch a grinding wheel
or other moving parts.
15.
NEVER
reach to pick up a workpiece, a piece of scrap, or anything else that is
in or near the grinding path of the wheel.
16.
AVOID AWKWARD OPERATIONS AND HAND POSITIONS
where a sudden
slip could cause your hand to move into the wheel.
ALWAYS
make sure you have
good balance.
17.
NEVER
stand or have any part of your body in line with the path of the wheel.
18.
DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF.
Have
defective switches replaced by an authorized service center.
7
TDS-200C4HL
Summary of Contents for TDS-200C4HL
Page 24: ...23 TDS 200C4HL EXPLODED VIEW...
