Bucktool TDS-200C4HL, Instruction Manual

Page: 7 / 28

WARNING
!
SAFETY GUIDELINES
17. USE RECOMMENDED ACCESSORIES. Consult this Instruction Manual for
recommended accessories. The use of improper accessories may cause risk
of injury to yourself or others.
18. NEVER STAND ON THE TOOL. Serious injury could occur if the tool is tipped
or if the cutting tool is unintentionally contacted.
19. CHECK FOR DAMAGED PARTS. Before further use of the tool, a guard or
other part that is damaged should be carefully checked to determine that it
will operate properly and perform its intended function– check for alignment
of moving parts, binding of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced.
20. NEVER LEAVE THE TOOL RUNNING UNATTENDED. TURN THE POWER
“OFF”. Do not walk away from a running tool until the blade comes to a complete
stop and the tool is unplugged from the power source.
21. DO NOT OVERREACH. Keep proper footing and balance at all times.
22. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and
safest performance. Follow instructions for lubricating and changing
accessories.
23. DO NOT use power tool in presence of flammable liquids or gases.
24. DO NOT operate the tool if you are under the influence of any drugs, alcohol
or medicationn that could affect your ability to use the tool properly.
25. Dust generated from certain materials can be hazardous to your health.
Always
operate saw in well-ventilated area and provide for proper dust
removal.
26. People with electronic devices, such as pacemakers, should
consult their physician(s) before using this product. Operation of electrical
equipment in close proximity to a heart pacemaker could cause interference
or failure of the pacemaker.
27. WEAR HEARING PROTECTION to reduce the risk of induced
hearing loss.
6
TDS-200C4HL
WARNING:
Cancer and Reproductive Harm www.P65Warnings.ca.gov.