19
TDS-200C4HL
MAINTENANCE
5.. Loosen the hex nut (8) by an
adjustable wrench as shown in
Fig. J.
NOTE:
The nut on the left side of
of the grinder has a standard
left-hand thread
(turn clockwise
to loosen). The one on the right
side has a
right-
hand thread (turn
counterclockwise to loosen). Both
wheel nuts tighten when turning
toward the rear of the grinder and
loosen when turningtoward the
front of the grinder.
3. Remove three screws (4) and lock
nuts (5) from theside wheel cover and
then remove the outer cover (6).
4. To prevent wheel rotating, place a
wood wedge (7) (not supplied)
between the wheel and the wheel
cover as shown in Fig. I.
NOTE:
Using a metal object, like a
screwdriver, is not recommended
as it may damage the grinding wheel.
CHANGING GRINDING WHEELS
(FIG. H, I, J, K, L)
1. Raise the eye shield (1) out of the way
and adjust the spark guard (2) in its
highest setting.
2. Loosen the knob and remove the
tool rest assembly (3).
CAUTION
!
Turn off and unplug the bench grinder.
Use only grinding wheels that measure
8 in. (200 mm) in diameter. This tool has
5/8 in. (15.88 mm) arbors on both sides.
Fig.J
Loosen
7
8
4
5
7
1
3
2
Fig. H
Fig. I
6
Summary of Contents for TDS-200C4HL
Page 24: ...23 TDS 200C4HL EXPLODED VIEW...
