8”, 1/2 HP
BENCH GRINDER/SANDER
INSTRUCTIONS
Part #13577
Page 1: ...8 1 2 HP BENCH GRINDER SANDER INSTRUCTIONS Part 13577 ...
Page 2: ...el 60 Grit 2 x 28 0 90 Adjustable Angle Sanding Belt 80 Grit Flexible Stem 40 watt work lamp Bulb not included ASSEMBLY AND SET UP Remove Grinder Sander parts bags and hardware from packaging Be careful not to discard parts bags with packaging Attach Tool Rest to lower edge of wheel guard opening with supplied knob screw washer and lock washer Fig A Locate slot over pin and adjust so that rear edg...
Page 3: ... in the wheel and ground object which can cause damage and burns Dip the object into the coolant in the tray as required NEVER grind against the side of the wheel as an imbalance condition or even cracking can occur ADJUSTING BELT ANGLE Make sure the grinder is OFF and UNPLUGGED Loosen the two inner hex head screws rotate the Sanding Belt Arm to the desired position and retighten screws ADJUSTING ...
Page 4: ...l or belt loading up with metal Too much pressure being applied to the wheel or belt Reduce pressure Wheel too hard for material being ground use softer wheel Ground object being held too long against wheel or belt Grind several seconds on wait several seconds re grind Too much heat in ground object Dip into coolant REPLACING A WHEEL Your grinder s unique quick release covers make wheel replacemen...
