OPERA
TING INSTRUCTIONS
18
TDS-200C4HL
WARNING
!
Grind only on the face of the grinding wheel and never the side of it.
Prolonged grinding will cause most materials to become hot. Use care when
handling such materials.
SCISSORS
If possible, take the scissors apart to make the sharpening operation easier
and safer.
Remove material only from the outside surface and work from the heavy end
of the blade toward the tip.
KNIVES
Remove metal from both faces of most knives, working from the heavy end of
the blade toward the tip.
SCREWDRIVERS
The end of a properly sharpened screwdriver will be a perfect rectangle, absolutely
flat and perpendicular to the center line of the shank. The two sides and two
faces will taper outward from the edge of the shoulder or shank. They should
be flat with intersecting faces perpendicular. Hold each face of the screwdriver
against the wheel to true it up, then ease the end straight into the stone to
grind it true.
CAUTION
!
7. If the surface of the wheel becomes loaded and dull with workpiece material,
the wheel should be cleaned with a dressing tool.
8. After reshaping, always readjust the tool rests and spark arrestors.
2. Always keep the workpiece moving across the face of the grinding wheel.
Grinding continuously on the same spot on the wheel will cause grooves to
be worn into the wheel. The wheel may crack or become damaged more
easily, and grinding of other objects will be difficult.
3. If the workpiece becomes hot, dip it into water or oil to cool it.
4. Always grind on the face of the wheel (around the diameter), NEVER on the
sides. Side pressure on grinding wheels can cause cracking and damage.
5. If the face of the grinding wheel is worn unevenly, becomes grooved, or is no
longer smooth and flat, the wheel should be reshaped with a dressing tool.
6. If the grinding wheel is no longer round, the wheel should be reshaped with a
dressing tool or replaced.
Summary of Contents for TDS-200C4HL
Page 24: ...23 TDS 200C4HL EXPLODED VIEW...
