KTF/100HPS Operation
- 3-2 -
KTF/100HPS
5. LCD DISPLAY
It provides the real time display of measured and adjusted tension values, as well as
the parameters programmable within the various menus, programming and error
messages, device status, etc.
Symbols shown on LCD
A – Labels Area
OK
Indicates the activation of any of the 3 push-buttons of KTF/100HPS device.
COM
Communication in progress with SMART KTF 2000 terminal or with the PC.
CONTROL
Indicates that the KTF/100HPS device is operating in Control status.
PROGRAM
Indicates that the KTF/100HPS device is in Parameters Programming status.
TARGET
Indicates that the set Target has been reached.
INC
DEC
Indicates with 1 flashing the increment of main tension.
Indicates with 1 flashing the decrement of main tension.
P1
P2
In Control environment indicates that the operating tension is the one defined in P1
(
MAIN TENSION
).
In Control environment indicates that the operating tension is the one defined in P2
(
EXIT TENSION
)
.
B – Message Area
It shows, in the selected language, the various programming menu items, as well as the error messages
during the device operation, the yarn feeding speed
(LFA nnnn)
, the device internal temperature, etc.
C – Value Visualization Area
It shows the yarn tension value, during the normal operation, or the parameter being programmed.
D – Graphic Visualization Area
It shows, in graphical form
(through a logarithmic scale)
both average and peak tension values.
