KTF/100HPS Operation
KTF/100HPS
- 3-17 -
P3.3
KEY CODE
This function allows you to define a secret numeric code to prevent non authorized
personnel from accessing the P1, P2, P3, P4 programmable functions.
This function may be either enabled or disabled by holding down the
button
for 3 seconds.
OFF
indicates that the function is currently disabled.
If you enter an access code, this will be requested each time you attempt to activate
the programming environment.
When the
KEY CODE
??? request appears, type the secret key-code using
and
buttons.
increase the value of secret key code.
decreases the value of secret key code.
Press
to save the key-code and move to the next parameter.
P3.4
KTF CODE
This function allows you to visualise and/or set the numeric code corresponding to
the identification address of the KTF/100HPS device.
Set the desired identification code using
(to increase the value)
or
(to
decrease the value).
!
Usually the setting of device identification code is carried out from SMART
KTF 2000 terminal using the serial communication port, however in
particular circumstances (for instance after the replacement of a
KTF/100HPS device), it may be useful to set the code operating directly on
the new device.
to return to the beginning of P3 menu.
to switch to P4 menu.
to return to CONTROL status without programming P4 menu.
