manualshive.com logo in svg

Bticino Terraneo PABX 18D, Installer Instructions For Use, Page: 90 / 100

Share
Download
Bticino Terraneo PABX 18D Installer Instructions For Use Download Page 90

PABX 18D

90

3         4   M   P   T   R

A U X

2   F I L I

S C S

346810

N N

P

NN1

P

6

  

11     EXPANDABILITY

Warning: Correct operation of the 2-wire interface is guaranteed using PABX exchanges 335818
and 335828 produced with production batch 0139 6 or later or, if previous, updating it with TIPBX
software ver. 4.1 or later; item 335916 (relay module) instead can only be used with the 2-wire
interface if produced with production batch 0116 6 or later.

11.5  DOOR ENTRY INTERFACE MODULE FOR THE 2-WIRE SYSTEM

(ITEM 346810)

This interface module must be used to connect the exchange to the riser of the 2-wire system, both audio
and video.
The interface must be suitably configured.
Dimensions 3 DIN modules

2-wire system

Exchange  Art. 335828

P:        indicates on which outdoor station key

 acts with system idle

N:    assigns the correspondence for the 1

st

door entry call

N1:    assigns the correspondence for the 2

nd

door entry call (optional)

Summary of Contents for Terraneo PABX 18D





































































































Reviews:

No comments